eBookwise 1150 power supply help!
#1  eBookLuke 12-16-2011, 02:07 PM
Hi all,

I own an eBookwise 1150 without the power supply. I need to know the voltage and the current of the power supply (are usually printed on the powaer supply itself).

Thanks to all


P.S.: if someone has a spare original power supply, I can buy it

P.P.S.: If someone still have the original box I can buy it also


#2  mark844 12-16-2011, 03:30 PM
The spec is 12v 1000mA : Outside -, Center pin +.

If the power supply is more than 1000mA (1A) then that's also alright (I have one that is 1.5A and I split the output to charge 2 readers at once).

The original is (you can find these on eBay as well):
Thompson Consumer Electronics
Model No: 481210003CT
Input: 120VAC 60Hz
NOTE: There's a LEI brand with the same model number that has an incompatible plug on it.

If you're able to do some soldering then, as a last resort:
1. Get a 12v switch mode power supply from eBay (assuming you are willing to wait 1 month for delivery) for about $3
2. Purchase a new plug that fits the reader (0.7 x 2.35 mm) - see DigiKey part # CP-012-ND
3. Assemble.

I've built up a few like this for myself over the years without any problems.

The advantages are that it's smaller, lighter, more efficient and accepts 90-250v 50/60 Hz input and you can choose the type of plug - e.g. you would most likely want the EU version.

Hope this helps.

#3  DaleDe 12-16-2011, 04:46 PM
There is also a link to a replacement in the wiki for the eBookwise 1150.

Today's Posts | Search this Thread | Login | Register