My Pixelar ereader
#1  queens_own 07-10-2012, 09:23 AM
Hi All,
I have the S6-5w ereader and I am only just getting to grips with it, it being my first ereader although it is a replacement for one I was given at xmas, that one was very eratic, in trying to get a font that I could read I found that I was scrolling across the page for every line, then after playing with it I got a font that was usable, then the bookmarks started to play no time did a bookmark ever give me any info of page No ect, then it started to take me to a page that was several pages in front or behind the bookmark, then it finaly froze, sent it back and received a replacement which does seem to be working ok in all the departments mentioned above.
However I now have 14 do I delete the old ones, (not in the manual) and when connected to either the pc or the mains how long does the battery take to charge and does anything show you that it is charged? (again not in the manual).
I am using Mobi as the format which can be changed in Calibre, is this the ideal format? is there a format that is right for this ereader?

#2  Stormchild 07-10-2012, 02:15 PM
I am pretty certain that is not a Hanlin model. You might want to find a more appropriate section for your question.

#3  Billi 07-10-2012, 04:36 PM
Are you sure, Stormchild? At least they link to the Hanlin firmware on their website.

#4  Stormchild 07-11-2012, 04:27 AM
They link to the Hanlin V3 firmware. That is the model they sold previously. I might be wrong but I see no connection between the S6-5w and Hanlin.

#5  queens_own 07-11-2012, 07:38 AM
Hi Guys,
Maybe I should have added the make of the mreader which is Pixelar, does that make a difference to where I look?

#6  Stormchild 07-11-2012, 05:09 PM
No. Pixelar only re-brand their products. Their early models were manufactured by Hanlin but I am positive this one is not. Can you not contact Pixelar? It sounds like a perfectly reasonable Support question.

There is a thread here about the same model and it is in the general section. A more likely place for you to get an answer.

#7  pholy 07-11-2012, 05:50 PM
I took a look at a firmware upgrade from the Pixelar site and this is no Hanlin reader, which always used software from Jinke. The hardware pictures don't look like anything I've seen before, either. Sorry, without taking it apart, I can't help

I don't guarentee to put it back together, though...

#8  queens_own 07-14-2012, 12:58 PM
It seems that this is the place for my Pixelar ereader see below...
HanLin eBook
OEM manufacturer of E ink and SiPix devices. Branded Hanlin readers include Walkbook, lBook eReader, Apollo, Papyre, Pixelar E-Reader, Koobe, ECO Reader

#9  Stormchild 07-14-2012, 02:40 PM

I have already told you. The earlier Pixelar were Hanlins. This one, the one you have, is not. Still don't listen to me, you carry on. I await the response from other owners of this machine.

ps. Have you tried contacting Pixelar?

#10  DaleDe 07-16-2012, 12:41 PM
Does it look like this?

Hanvon is not Hanlins.

  Next »  Last »  (1/2)
Today's Posts | Search this Thread | Login | Register