Tirwal Firmware
#1  catbehemoth 05-13-2011, 01:20 PM
Could someone point me to a manual for Tirwal firmware?
I visited few spanish website with what seems like lots of information but it all over the place and i'm very confused.

I just installed Tirwal3.2-180211 and i love it, but i'd like to know how it works as i want to tweak some things.
How to:
triple boot - how do i switch between them?
File association - i only use FB2 and EPUB can i make it so both are open with CR?

Thank you for all work you've done Tirwal.

PS. when i update it says version 1.0.5 2008-03-21 I understand its version of original Halin firmware, do i need to update it as well?

#2  catbehemoth 05-13-2011, 01:23 PM
by the way,
latest firmware i know is here

#3  blueclothes 05-13-2011, 08:56 PM
triple boot:
just copy the "config" to the root of your SD card
run one of the EXE
then turn off and on
check Tirwal's manual from:[FIRMWARE]-Tirwal-2-81-TRIPLE-BOOT-ADDONS&sl=es&tl=en

#4  ayoshak 09-09-2011, 11:07 AM
I have BeBook One (V3ext) 2009 issue, Kernel2.6.11.7, Firmware v2.11NL.090910.
Is there some reason I am unable to update to Tirwal's firmware/software ver3.2?
I am using 500MB SD card I used previously for firmware update with a success.
If I try to update to Tirwal's V3update.bin it just hangs there with nothing happening. The firmvare doesn't change inside BeBook.
If I try to use Tirwal's config folder (on another SD card with books) and choose any of three exe files, again it just hangs there with blinking LED and busy sign in the middle for ever.
It would be a shame to fail here as Tirwal's version is highly regarded in BeBook community.

#5  n1ch0las 11-22-2011, 06:11 AM
Could somebody pleas post information on how to update the firware using tirwals firmware or a working link to the manual, because i have tried copying it to the root folder and nothing works at all, thanks

#6  DaleDe 11-22-2011, 02:52 PM
Are you using it on a 3+. I am not sure they have a version for the 3+. It is distinct from the V3 or V5.


#7  Roberts324 12-06-2011, 07:37 AM
Quote blueclothes
triple boot:
just copy the "config" to the root of your SD card
run one of the EXE
then turn off and on.
First you must "root" the thing to install the firmware : this is done by copying the config directory AND the V3update.bin file to your SD card's root, then turning the reader off, then turning it on by first pressing the "volume+" button, then the "on" button.

Once this is done, you may choose to run one of the three scripts in the config directory; after rebooting the reader, you can test the mode you just chose.

Today's Posts | Search this Thread | Login | Register